Are you encountering a specific or layout question on your physical unit? Share public link

Here are issues users face when they lose their :

: A high-contrast backlit LCD screen showing real-time scheduling status, channel outputs, and programmatic parameters.

Hager operates country-specific sites (e.g., hager.co.uk, hager.fr, hager.de). The BP 10140 may have been more common in European markets. Try each site’s search function.

Specific channels are designated as "All On" or "All Off" functions, ignoring the individual channel states.

If the exact manual is missing, look for – they often share the same installation and programming steps.

If you have lost the paper insert that came with the BP 10140, here are general industry standards for similar Hager busbar/mounting accessories (always verify with the official datasheet):

Once installed and configured, the device will function automatically based on its programming. Many devices have a manual override mode to control outputs regardless of automatic schedules, often indicated by a light on the manual button. Your device's specific functions will be detailed in its manual.

: Loop a short jumper wire from your main live supply line directly over into the internal relay terminal point (typically marked as Pin 1).

1.5mm² to 4mm² rigid or flexible cables Mounting Type: DIN rail profile (Width: 2 modules / 35mm) Safety and Installation Compliance

⚠️ Isolate the mains electrical supply before starting the physical installation. Wiring must comply with local national wiring regulations.

If your device is not operating as expected, use this checklist to resolve the issue. The Screen is Entirely Blank

The Hager Controls BP 10140 is a highly versatile and user-friendly control panel designed for managing electrical installations in residential and commercial settings. In this article, we will provide an overview of the Hager Controls BP 10140 manual, covering its key features, technical specifications, and essential operating instructions.

address for in Saverne, France. Because this address appears in the footer of almost every manual produced by Hager, it is often mistaken for a specific device part number.