Click the button at the top. The software will scan your local network for compatible devices. Check the box next to your NVR from the list and click Add .

If auto-search fails, do it manually.

Are you experiencing any specific during the setup process?

: Toggle the power button or switch to "Online" status. Initialize Hard Drive : Go to Disk Management . Select your local drive and click Allocate .

link at the login interface to recover via email or security questions. motion detection alerts specifically within the SmartPSS interface? Using SmartPSS - Basics and first time setup

Gather the following credentials before launching the setup wizard:

Enter the local static IP address of the NVR, or type the alphanumeric P2P Serial Number found on the NVR sticker or network menu.

Setting up your PC as a Network Video Recorder (NVR) using Smart PSS turns any compatible computer into a dedicated surveillance server. This setup allows you to record, view, and manage your IP cameras directly on your hard drive without buying standalone NVR hardware. Prerequisites Before Setup

Use this method if the NVR is on a different subnet, or if you want to configure remote viewing via Serial Number (P2P). Inside the menu, click the Add button (plus icon). Fill out the configuration fields:

You can download the software from the official DahuaWiki or your device manufacturer’s support portal. Look for "SmartPSS Lite" to ensure you have the most up-to-date version.

✅ Smart PSS installed with PC-NVR component ✅ Cameras added and online in Device Manager ✅ PC-NVR enabled with valid storage path ✅ Cameras assigned to PC-NVR channels ✅ Recording schedule configured ✅ Playback verified ✅ PC set to never sleep ✅ Backup storage path for critical cameras

Now you must add your newly configured PC storage server into the main Smart PSS control panel. Launch the main software application. Enter your master login credentials. Click on Devices from the main menu console.

Your computer must be on the same local network (subnet) as the NVR for the initial local setup.

Enter the static IP address of your NVR (e.g., 192.168.1.108 ).

Create a recognizable name (e.g., "Office NVR" or "Home Cameras").

You will see a list of your computer’s hard drives. Select the dedicated drive or partition you want to use for surveillance.

Use this method if your PC and NVR are on the same local network subnet.

When you launch Smart PSS for the first time, you must secure the software application itself.

To set up motion recording:

Nvr Setup //top\\ | Smart Pss Pc

Click the button at the top. The software will scan your local network for compatible devices. Check the box next to your NVR from the list and click Add .

If auto-search fails, do it manually.

Are you experiencing any specific during the setup process?

: Toggle the power button or switch to "Online" status. Initialize Hard Drive : Go to Disk Management . Select your local drive and click Allocate .

link at the login interface to recover via email or security questions. motion detection alerts specifically within the SmartPSS interface? Using SmartPSS - Basics and first time setup smart pss pc nvr setup

Gather the following credentials before launching the setup wizard:

Enter the local static IP address of the NVR, or type the alphanumeric P2P Serial Number found on the NVR sticker or network menu.

Setting up your PC as a Network Video Recorder (NVR) using Smart PSS turns any compatible computer into a dedicated surveillance server. This setup allows you to record, view, and manage your IP cameras directly on your hard drive without buying standalone NVR hardware. Prerequisites Before Setup

Use this method if the NVR is on a different subnet, or if you want to configure remote viewing via Serial Number (P2P). Inside the menu, click the Add button (plus icon). Fill out the configuration fields: Click the button at the top

You can download the software from the official DahuaWiki or your device manufacturer’s support portal. Look for "SmartPSS Lite" to ensure you have the most up-to-date version.

✅ Smart PSS installed with PC-NVR component ✅ Cameras added and online in Device Manager ✅ PC-NVR enabled with valid storage path ✅ Cameras assigned to PC-NVR channels ✅ Recording schedule configured ✅ Playback verified ✅ PC set to never sleep ✅ Backup storage path for critical cameras

Now you must add your newly configured PC storage server into the main Smart PSS control panel. Launch the main software application. Enter your master login credentials. Click on Devices from the main menu console.

Your computer must be on the same local network (subnet) as the NVR for the initial local setup. If auto-search fails, do it manually

Enter the static IP address of your NVR (e.g., 192.168.1.108 ).

Create a recognizable name (e.g., "Office NVR" or "Home Cameras").

You will see a list of your computer’s hard drives. Select the dedicated drive or partition you want to use for surveillance.

Use this method if your PC and NVR are on the same local network subnet.

When you launch Smart PSS for the first time, you must secure the software application itself.

To set up motion recording: