Quingo Air 1 User Manual

Enables smooth acceleration. Audible Warning Horn Button: For safety alerting others. Driving and Braking

Unplug the battery connector and lift the battery pack out.

Test the lock by attempting to rotate the seat without pulling the release lever. Attaching the Battery Pack

: Before turning on the ignition, pull and release both the left and right drive levers. They must return to the center immediately; if they stick, do not operate the scooter.

| Task | Weekly | Monthly | 6 Months | |------|--------|---------|----------| | Check tyre condition & pressure* | ✓ | | | | Clean frame with damp cloth | ✓ | | | | Check for loose bolts/nuts | | ✓ | | | Inspect brake function | | ✓ | | | Check battery terminals for corrosion | | ✓ | | | Professional service (authorised dealer) | | | ✓ | quingo air 1 user manual

Warranty void if unauthorised repairs, accidents, or overloading.

Line up the front and rear sections. Lower the front frame hooks onto the rear frame hinge pin. Push down until the locking mechanism clicks into place.

Insert the key and turn clockwise to power on. Turn counterclockwise to power off.

The Quingo Air 1 is built for easy transport and can be dismantled into lightweight components without tools. Enables smooth acceleration

Insert the high-security ignition key and turn it on. Move Forward/Reverse: Use the Fingertip speed levers.

+-------------------------------------------------------------+ | QUINGO AIR 1 COMPONENT BREAKDOWN | +-------------------------------------------------------------+ | [ Seat ] ---> [ Battery Pack ] ---> [ Rear Drive Unit ] | | | | [ Main Chassis Frame ] | +-------------------------------------------------------------+ Disassembling for Transport

Depending on your model configuration, lift the battery box (or boxes) out of the chassis compartment.

If your Quingo Air 1 fails to operate correctly, check the status of the flashing lights on your battery gauge. The number of flashes corresponds to a specific issue: Number of Flashes Low battery voltage Place the scooter on charge immediately. 2 Flashes Bad motor connection Check all wiring connections to the rear motor. 3 Flashes Motor short circuit Contact an authorized Quingo service engineer. 4 Flashes Freewheel lever engaged Disengage the freewheel lever to activate drive mode. 5 Flashes 6 Flashes Charger connected Unplug the charger from the tiller port before driving. 7 Flashes Wig-wag lever error Test the lock by attempting to rotate the

The manual is typically well-organized, following standard medical device documentation protocols.

Before driving, familiarize yourself with the dashboard control panel located on the handlebars.

Store your scooter in a dry, well-ventilated area near a power point.