Proceq Profometer 4 Manual [repack] «Genuine · PICK»

: Attach a grid layout or photos showing where the scans were performed relative to the structural elements.

Offers higher spatial resolution for tightly spaced reinforcement bars. Connecting Cable: Links the probe to the control unit.

Press the button. The digital display must read exactly zero, and the analog needle should rest at its baseline.

To ensure accuracy, the Profometer 4 should be checked regularly using the (supplied with the kit). proceq profometer 4 manual

The "Corrosion Scan" is the only measurement mode available when the interface box is connected to a platform. The display and configuration depend on whether a rod or wheel electrode is selected. The voltage measurement range for corrosion analysis is from , with a resolution of 1 mV and an impedance of 100 MΩ . This feature is critical for assessing the long-term durability of a structure, as corrosion of rebar is a leading cause of concrete deterioration and structural failure.

Check the probe, cable, and housing for visible damage.

For any specific maintenance or repair, it is recommended to contact a Proceq representative . If you'd like, I can: : Attach a grid layout or photos showing

Keep the probe away from non-rebar metal, such as chairs or steel wire ties.

Designed for harsh construction environments. 2. Setting Up the Profometer 4 Go to product viewer dialog for this item.

Standard AA batteries or a rechargeable battery pack. 2. Step-by-Step Operating Instructions Press the button

The center line of the probe indicates the precise location of the rebar. 2. Essential Operating Steps

Store the system inside its original padded protective transit case in a dry, temperature-controlled environment.

The current generation, the PM8000 series, represents an even more significant evolution with wireless connectivity, app-based control using an iPad, and enhanced cloud-based data management features.