This image is compatible only with the (WS-C3560-24TS, WS-C3560-48PS, etc.) – those with 128 MB flash and 128 MB DRAM.
Upgrading a Catalyst 3560 switch to this image follows standard Cisco IOS upgrade procedures via a TFTP or FTP server.
Supports exterior routing protocols, allowing the switch to act as a minor edge device or peer within a private Autonomous System (AS). c3560ipservicesk9mz1502se11bin top
Upgrading process is another aspect. Users need to know how to perform an upgrade without downtime, maybe through a TFTP server or using the switch's CLI. Also, license keys for the ipservicesk9 image might be necessary, depending on the original licensing of the switch.
You cannot. The Catalyst 3560 (non-X) hardware platform is end-of-support . Cisco never released an official 15.2 software train for the standard 3560. The last supported train was 15.0(2)SE . The "E" in 3560E supports up to 12.2(55)SE or 15.0(2)SE only. Pushing a 3750E image will brick the switch. This image is compatible only with the (WS-C3560-24TS,
: This IOS is compatible with both standard Catalyst 3560 and 3560-E/3560-G series switches, including PoE models.
Comprehensive Access Control Lists (ACLs), SSHv2, and advanced SNMPv3 management. Upgrading process is another aspect
+--------------------------------------------------------------+ | Memory Requirments for IOS 15.0(2)SE11 | +------------------------------+-------------------------------+ | Hardware Specification | Required Minimum Capacity | +------------------------------+-------------------------------+ | Flash Memory | 32 Megabytes (MB) | | Onboard DRAM | 128 Megabytes (MB) | +------------------------------+-------------------------------+