V2000-c Rfid Access Control User Manual full

9999 (or 0000 depending on the production batch)

The V2000-C RFID Access Control system provides a robust, standalone security solution for managing entry points using 125kHz EM cards or 4-digit PINs, accommodating up to 1,000 users. It features versatile, non-PC-based management for adding/deleting users and flexible wiring options for both fail-safe and fail-secure modes, suitable for small to medium-sized facilities.

The is a versatile and efficient standalone access control unit designed to secure entry points for businesses, residential buildings, and other facilities. This comprehensive guide provides detailed instructions on everything from installation and wiring to advanced programming and user management. V2000-c Rfid Access Control User Manual

A: Check the status of the Red (Power) and Green (OK) LEDs. If the Red light is off, check your 12V power supply. If the Red light is on but the Green light does not flash when presenting the card, the card may not be registered in the database. Try re-adding the user.

The V2000-C is an RFID access control reader and controller designed for single-door access management. It supports card/tag reading, basic user management, event logging, and integration with electric locks and exit devices. 9999 (or 0000 depending on the production batch)

Press [*] or wait for the system to time out. 3. User Management

| Step | Action | | :--- | :--- | | 1 | Press * + Master Code + # | | 2 | Press 1 (Add User) → # | | 3 | Swipe card (beep 1x) | | 4 | Enter 4–6 digit PIN → # | | 5 | Swipe same card again to confirm → # | If the Red light is on but the

Connect the power supply to the V2000-C GND and the COM terminal.

V2000-c Rfid Access Control User Manual __full__

V2000-c Rfid Access Control User Manual full