Watch the progress bar. The software will clear the old controller settings, scan the flash memory sectors, write the new firmware code, and format the drive. Step 6: Verify Completion
Here is a step-by-step guide to "hot fix" your FC1178BC drive:
Change the Scan Level to Clear or Full to force the tool to re-identify the flash memory and overwrite the problematic firmware.
Updating or re-flashing the firmware often resolves the "hot" issue by resetting the controller’s logic and marking bad sectors in the flash memory. How to Find the Correct Firmware firstchip fc1178bc firmware hot
Locate the specific version of FC1178BC MpTools that matches your Flash ID .
Here is the step-by-step process, synthesized from numerous successful community guides.
Download a few versions starting with the newest available release. If the newest tool fails to read the NAND flash signature, step backward to a version corresponding closer to the drive's original assembly date. Watch the progress bar
Run the tool, click "Start," and wait 10-20 minutes. Note: Your data will be erased.
Download (Windows only). Look for:
Before doing anything, you need to be 100% sure the drive uses an FC1178BC controller. Updating or re-flashing the firmware often resolves the
Download and launch (a free USB information utility). Plug in your corrupted USB drive.
to begin the firmware re-write. This process can take anywhere from a few minutes to over an hour depending on the drive's capacity. Using these tools will permanently erase all data
Flashing firmware can stress the USB hardware. Avoid using USB hubs or extension cables during this procedure.
You need to find a version of the tool compatible with your chip's manufacturing date.