You must log in as an Administrator on your Windows 10 PC.
| Problem | Likely Cause | Solution | |---------|--------------|----------| | No communication with ECU | Wrong COM port | Verify COM port in Device Manager; set to COM4 or 8 | | Application crashes on start | Missing VC++ runtime | Install Visual C++ 2015-2022 x86 | | Interface not detected | Driver signature enforcement | Reboot with driver signing disabled | | Cannot read VIN | Low latency timer | Set FTDI latency to 1 ms | | "Hardware not found" error | Counterfeit FTDI chip | Use older FTDI driver (2.8.24 or earlier) |
Hold down the key on your keyboard while clicking Restart in the Windows Start Menu. Renolink 1.87 Install Windows 10
: Right-click the shortcut and select Run as administrator to ensure full permissions.
Right-click renolink.exe , select , go to the Compatibility tab, check Run this program as an administrator , and click Apply . Double-click renolink.exe to launch the software. Step 6: Verify Software Communication You must log in as an Administrator on your Windows 10 PC
However, because this software was released before the widespread adoption of Windows 10’s strict driver enforcement, users often encounter the infamous error.
Right-click the port -> -> Port Settings -> Advanced : Bits per second : 115200. Right-click renolink
For more detailed guidance on specific features, you can refer to the Renolink Software User Manual or check for official updates on Renolink.store Are you planning to use this for key programming clearing crash data , as the setup steps for those specific tasks can vary?
The software cannot see your USB cable. Check Device Manager to verify the COM port number. Ensure the latency timer is set to 1. Make sure no other diagnostic software is running in the background utilizing that port. Error: "License Invalid" or Crash on Launch