Zk-5kx Manual -

In the normal interface, short press the button to enter the voltage and current adjustment interface. The V (Voltage) or A (Current) indicator will flash.

Set the maximum output current limit. OPP (Over Power Protection): Set the maximum wattage. Zk-5kx Manual

The engineer's fate, and that of humanity, hung in the balance, as the void waited patiently, eager to claim its own. In the normal interface, short press the button

Cycles through the bottom display line: Power (W), Capacity (Ah), and Run Time. OPP (Over Power Protection): Set the maximum wattage

If the displayed voltage is inaccurate, you can calibrate it by measuring the input with a trusted multimeter and adjusting the internal offset settings via the parameter menu (similar to the ZK-4KX model).

To set whether the device starts "ON" or "OFF" when powered: Long press to enter the parameter menu. Locate "OPEN OFF" (default off) or "OPEN ON" (default on).

In the main display, serves as a master switch to turn the module's output on or off. When disabled, the display will show "OFF," even if the module remains powered. This is particularly useful for safely connecting loads before applying power.