Airbot Hypersonic Pro Manual [extra Quality] -

This is usually caused by a full dust cup or a dirty HEPA filter. Check that the seals are properly aligned.

The Hypersonic Pro uses a multi-stage HEPA system. Twist the top of the dust cup to remove the HEPA filter. Pull out the stainless steel pre-filter. Wash both under cold water.

: Features an E13 grade HEPA filter that removes 99.97% of fine particles. Airbot Hong Kong Operation Guide The vacuum utilizes a smart LED touchscreen to give the user full control over cleaning modes. Mode Selection : Use the touch interface to switch between

Allow filters to air dry for at least 24 hours before reinserting. Using wet filters can damage the motor. airbot hypersonic pro manual

Up to 50 minutes (Eco Mode) / 15 minutes (Max Mode) Charging Time: 4–4.5 hours Dustbin Capacity: 0.6 Liters

Press the button again to turn the machine off. You do not need to hold the trigger down while vacuuming. Switching Suction Modes

The Airbot Hypersonic Pro features an intuitive LED display panel on top of the handle. This screen provides real-time diagnostics and status updates. Powering On and Switching Modes This is usually caused by a full dust

A: Press the Mode button until you see "A" (Auto) . In this mode, the vacuum automatically increases suction by 400% when it detects high debris density.

Check for a blockage in the wand or the floor head. If the airway is clear, ensure the HEPA filter is clean.

The LED display features a color ring that changes color based on the dust level: High dust concentration (maximum suction activated). Blue: Area is clean (suction decreases to save battery). 4. Charging and Battery Maintenance Twist the top of the dust cup to remove the HEPA filter

Regular upkeep ensures the longevity of the brushless motor and maintains peak suction. Airbot Hypersonics Pro

Solution: Turn off the device. Use the coin-slot latch on the side of the floor head to release the roller bar. Slide the roller out and use a pair of scissors to carefully slice along the integrated cutting groove to clear wrapped hair.